 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CLI300 Series IRED - Photosensor Photointerrupters (R) Clairex Technologies, Inc. March, 2005 features * rugged plastic package * hermetically sealed components * various output configurations description The CLI300 series each consist of an IRED and photosensor mounted in a black plastic housing. Each device has 12 inch leads and two holes for bracket mounting in any position. Alternate output circuits and lead lengths are available. For assistance, call Clairex. absolute maximum ratings (TA = 25C unless otherwise stated) storage and operating temperature................................................ -55C to +100C IRED continuous forward current ............................................................................. 60mA reverse voltage .................................................................................................... 5V continuous power dissipation(1) .................................................................... 100mW CLI325, CLI355 and CLI375 OUTPUT collector-emitter voltage..................................................................................... 30V (2) continuous collector current ......................................................................... 50mA continuous power dissipation(3) .................................................................... 200mW (4) CLI385 OUTPUT supply voltage.................................................................................................... 18V sink current ..................................................................................................... 25mA continuous power dissipation(3) .................................................................... 200mW notes: 1. Derate linearly 1.07mW/C from 25C free air temperature to TA = +100C. 2. 200mA when pulsed at 1.0ms, 10% duty cycle. 3. Derate linearly 2.13mW/C from 25C free air temperature to TA = +100C. 4. Buffer output. Output is LOW when input radiation is below threshold level. electrical characteristics (TA = 25C unless otherwise noted) symbol parameter Input IRED, all devices VF IR ID ID VCC ICC Forward voltage Reverse current Collector-emitter dark current Collector-emitter dark current Supply voltage Supply current min 4 - typ - max 1.5 10 100 50 16 12 units V A nA nA V mA test conditions IF = 10mA VR = 5V VCE = 10V, Ee = 0 VCE = 10V, Ee = 0 Output CLI325, CLI355 Output CLI375 Output CLI385 VCC = 4.5V - 16V Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Revised 3/16/06 Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com CLI300 Series IRED - Photosensor Photointerrupters electrical characteristics (TA = 25C unless otherwise noted) symbol parameter Coupled CLI325 IL VCE(sat) tr, tf VCE(sat) IL VO VOFF tr, tf VCE(sat) IL tr, tf Sensor light current Saturation voltage Output rise and fall time Saturation voltage Sensor light current Voltage output across 270 resistor Voltage output across 270 resistor Output rise and fall time (R) Clairex Technologies, Inc. min 3.0 12.0 3.2 - typ 50 300 max 1.2 1.2 0.4 - units mA V sec V mA V V sec V mA sec V A mA ns s s test conditions IF = 10mA, VCE = 5V IF = 10mA, IC = 4mA IC = 2.0mA, VCC=10V, RL = 100 IF = 10mA, IC = 4mA IF = 10mA, VCC = 5V IF = 10mA, VCC = 5V Ee = 0 IC = 2.0mA, VCC = 10V, RL =100 IF = 20mA, IC = 1mA IF = 10mA, VCE = 5V IC = 2.0mA, VCC = 10V, RL =100 IOL = 15mA, IF = 0(6) IF = 15mA, VOH = 18V Coupled CLI355 Coupled CLI375 Saturation voltage 0.5 Sensor light current 1.0 Output rise and fall time 5.0 Coupled CLI385 (VCC = 5V unless otherwise noted) VOL Low level output voltage 0.4 IOH High level output leakage 5.0 IF+ IRED positive going threshold(7) 10 IF+/IF Hysteresis ratio 1.2 tr, tf Output rise and fall time 75 tPLH Propagation delay, low to high 6.0 tPHL Propagation delay, high to low 6.0 note: 6. IF = 0 equates to light path being blocked by opaque object. 7. Minimum current applied to IRED to cause output to change state. IF = 0(6) or 15mA, f = 10kHz, Duty Cycle = 50%, RL = 240, CL = 15pF Schematic Configurations RED CLI325 BLUE RED CLI355 BLUE RED CLI375 BLUE RED CLI385 * BLUE GREEN GREEN 330 ohms BLACK YELLOW 270 ohms BLACK YELLOW BLACK YELLOW BLACK YELLOW * The CLI385 features an open collector, buffer, digital output. Other output functions such as inverter and internal 10K pull-up are available. Obtain a copy of the CLL Series data sheet from our website at www.clairex.com to see other available output configurations. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com |
Price & Availability of CLI300
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |